Stay ahead with the latest updates, exclusive offers, and expert tips on Japanese mini truck parts and accessories from Oiwa Garage. Sign up now and be the first to know!
4.9 from 479+ Product Reviews | US-Based Kei Truck Parts Specialists
This Distributor Rotor fits the Daihatsu Hijet Truck S100P, S110P (1994-1998) with the EF-TS (EFTS) or EF-ES (EFES) engine. It hands the spark from the coil to each cap terminal as it turns.
In Stock - ships from our California (USA) warehouse
Fast, reliable delivery - no overseas backorder wait.
Confirm your engine before you order
This part is engine-specific and fits the EF-TS (EFTS) or EF-ES (EFES) engine only. Before ordering, find your VIN / data plate in the engine bay and confirm the line marked ENGINE reads EF-TS (EFTS) or EF-ES (EFES). The photo below shows where to look.
Example plate shown is an EF-NS engine (chassis S100P, 659cc). Yours shows your own code on the same ENGINE line - for this part it must read EF-TS (EFTS) or EF-ES (EFES).
Vehicle Fitment & Compatibility
The Hijet ran several engines in this era. Confirm your engine code on the VIN plate above, not just the chassis, against the table below.
Not sure about fit? Add your chassis/VIN number at checkout and we confirm it before we ship. If a part does not fit your Hijet, we exchange it or refund you in full.
Signs you need this distributor rotor
A miss or stumble under load
A burnt or corroded rotor tip
Hard starting
Damp-weather misfire
Features & Function
Clean contact tip for a precise spark hand-off
Correct fit and rotation for the Hijet distributor
Pairs with a fresh cap for a complete refresh
Installation Specifications
Difficulty: Easy.
Estimated time: about 15 to 25 minutes.
Required tools: A screwdriver and basic hand tools.
Oiwa Garage Tech Note
"Replace the cap and rotor together - a new rotor under a tracked cap just fails again."
Frequently Asked Questions
How do I know if I have the EF-TS (EFTS) or EF-ES (EFES) engine?
Check the VIN / data plate in the engine bay - the line marked ENGINE shows your code (the example plate above reads EF-NS; yours must read EF-TS (EFTS) or EF-ES (EFES)). This part fits the EF-TS (EFTS) or EF-ES (EFES) engine only, so confirm the code before ordering.
Should I replace the cap at the same time?
Yes - cap and rotor wear together; a new rotor under a tracked cap just fails again.
Should I replace the cap too?
Yes - cap and rotor wear together; fit them as a set.
Fitment verified by the Kei truck specialists at Oiwa Garage · Listing updated June 2026.
It's pretty straight forward. The hardest part is getting the airbag wiring off the airbag. Mine was pinned on? I had to cut the plug off my airbag and then break it apart so I could use the horn plug(could probably cut that off-(since i cut it off the airbag anyway, I didn't do that). The ceramic nuggets plug into the airbag relay to shut the light off. Tape that in and plug it back in. All that fits underneath the adapter. It's fiddly but easy. The horn plugs into one of those weird rings.
Driving two vehicles. 1989 Landcruiser and 1995 Honda ACTy. Keep an eye for any parts I might need in the future. My Landcruiser parts spreadsheet is three pages long. With Oiwa Garage’s vast parts inventory I hope to be able to do the same for my ACTy.
