Honda Oil Filter - Honda Acty Van TN, HH1, HH2,HH3, HH4 Models - 1986-1999

This oil filter fits the Honda Acty Truck & Van TN, HH1, HH2, HH3, HH4 (1986-1999). It traps metal and combustion debris so clean oil keeps the E07A three-cylinder engine protected.

Vehicle Fitment & Compatibility

Confirm your chassis code against the table below before ordering.

Signs you need this oil filter

• Oil past its service interval or overdue for a change
• Low oil pressure or a noisy top end on startup
• Dark, gritty oil on the dipstick
• You are doing routine maintenance and want a fresh filter with the oil

Features & Function

• Correct thread and gasket size for the Acty E07A engine
• Filters metal and carbon so oil stays clean
• An inexpensive part that protects the whole engine

Installation Specifications

• Difficulty: Easy.
• Estimated time: about 15 to 30 minutes with the oil change.
• Required tools: An oil filter wrench, a drain pan, and a socket for the drain bolt.

Frequently Asked Questions

How often should I change this filter?

Change it with every oil change. On a hard-worked Kei truck many owners run a 3,000 to 5,000 mile interval; match it to how you use the truck.

How do I know when this oil filter is due?

You cannot test a filter directly, so go by the oil change. If the oil on the dipstick is dark and gritty, or the filter has been on for more than one change, fit a fresh one with the oil.

Should I pre-fill the filter before fitting?

On this sideways mount you cannot fully fill it, but oil the gasket and part-fill what you can so the engine sees pressure sooner on the first start.

Fitment verified by the Kei truck specialists at Oiwa Garage · Listing updated June 2026.