Close-up view of Valve Stem Seal Kit - Intake Side - Honda Acty HA3, HA4 (1990-1999) - Essential engine components for optimal performance.
Valve Stem Seal Kit for Intake Side - Honda Acty HA3, HA4 (1990-1999) - Six high-quality seals displayed in front of engine diagram.
Roll over image to zoom in Click on image to zoom
Close-up view of Valve Stem Seal Kit - Intake Side - Honda Acty HA3, HA4 (1990-1999) - Essential engine components for optimal performance.Valve Stem Seal Kit for Intake Side - Honda Acty HA3, HA4 (1990-1999) - Six high-quality seals displayed in front of engine diagram.

Valve Stem Seal Kit - Intake Side - Honda Acty Truck HA3, HA4 Models - 1990-1999

Oiwa Garage
1 review
Price:
$43.21
Stock:
In stock

Need help? Call or Text: 562-661-8862

Description

This valve stem seal kit fits the Honda Acty Truck HA3, HA4 (1990-1999). It seals the valve stems so oil does not draw down the guides into the combustion chamber.

In Stock - ships from our California (USA) warehouse

Fast, reliable delivery - no overseas backorder wait.

Vehicle Fitment & Compatibility

Confirm your chassis code against the table below before ordering.

Honda Acty Truck HA3, HA4 (1990-1999) - fitment
Make Honda
Model Acty Truck
Chassis Codes HA3, HA4
Years 1990-1999
Part Type valve stem seal kit

100% Fitment Guarantee

Not sure about fit? Add your chassis/VIN number at checkout and we confirm it before we ship. If a part does not fit your Acty, we exchange it or refund you in full.

Reasons to choose this valve stem seal kit

  • Blue smoke on startup or throttle tip-in
  • Oil use with no external leak
  • You are doing head or valve work
  • Fouled plugs from oil burning

Features & Function

  • Seals the valve stems against oil draw
  • Correct fit for the E07A head
  • Reduces oil burning and smoke

Installation Specifications

  • Difficulty: Advanced.
  • Estimated time: part of a head or valve job.
  • Required tools: A valve spring compressor and engine hand tools.

Oiwa Garage Tech Note

"You need to compress the springs to reach the seals, so this is head-off or specialist head-on work. Match the intake or exhaust side called out in the title."

Frequently Asked Questions

How do I know my valve stem seals are worn?

Watch the exhaust on a cold start or when you lift off and get back on the throttle - a puff of blue smoke with no external oil leak points to worn stem seals drawing oil down the guides.

Do I have to pull the head to fit these?

No - you can replace valve stem seals with the head on using a spring compressor and air to hold the valves up, but it is careful, patient work.

Should I replace this if it is not leaking yet?

If you already have the area apart for other work, fit a fresh one while the labor is done. Otherwise replace it once it weeps.

Fitment verified by the Kei truck specialists at Oiwa Garage · Listing updated June 2026.

You may also like
Pick up where you left off
Policies
RefundsShippingPrivacyTerms of Service