AC Belt for EFZS Engine, compatible with Daihatsu Hijet Van models S100, S110, S120, S130 from 07/1994 to 12/1998, featuring a durable black rubber construction.
AC Belt for EFZS Engine in Daihatsu Hijet Van models S100-S130 (07/1994-12/1998) with labeled components including alternator, water pump, crankshaft, and cooler compressor.
Roll over image to zoom in Click on image to zoom
AC Belt for EFZS Engine, compatible with Daihatsu Hijet Van models S100, S110, S120, S130 from 07/1994 to 12/1998, featuring a durable black rubber construction.AC Belt for EFZS Engine in Daihatsu Hijet Van models S100-S130 (07/1994-12/1998) with labeled components including alternator, water pump, crankshaft, and cooler compressor.

AC Belt - EFZS Engine - Daihatsu Hijet Van - S100, S110, S120, S130 Models - 07/1994-12/1998

Oiwa Garage
No reviews
Price:
$46.19
Stock:
In stock

Need help? Call or Text: 562-661-8862

Description

This drive belt fits the Daihatsu Hijet Truck & Van S100, S110, S120, S130 (1994-1998) with the EF-ZS (EFZS) engine. It drives the alternator, water pump, or A/C compressor with a quiet, slip-free grip.

In Stock - ships from our California (USA) warehouse

Fast, reliable delivery - no overseas backorder wait.

Confirm your engine before you order

This part is engine-specific and fits the EF-ZS (EFZS) engine only. Before ordering, find your VIN / data plate in the engine bay and confirm the line marked ENGINE reads EF-ZS (EFZS). The photo below shows where to look.

Example Daihatsu Hijet VIN data plate showing the EF-NS (EFNS) 659cc engine code on the ENGINE line, chassis S100P. Example only - check your own plate to confirm your engine before ordering.
Example plate shown is an EF-NS engine (chassis S100P, 659cc). Yours shows your own code on the same ENGINE line - for this part it must read EF-ZS (EFZS).

Vehicle Fitment & Compatibility

The Hijet ran several engines in this era. Confirm your engine code on the VIN plate above, not just the chassis, against the table below.

Daihatsu Hijet Truck & Van S100, S110, S120, S130 (1994-1998, EF-ZS (EFZS)) - fitment
Make Daihatsu
Model Hijet Truck & Van
Chassis Codes S100, S110, S120, S130
Years 1994-1998
Engine EF-ZS (EFZS)
Part Type drive belt

Signs you need this drive belt

  • Squealing on start-up or under load
  • Cracks, glazing, or fraying on the belt
  • A weak charge or warm engine from slipping
  • A belt that has never been replaced

Features & Function

  • Drives the alternator, water pump, or A/C compressor
  • Correct length and profile for a proper fit
  • Restores quiet, slip-free accessory drive

Installation Specifications

  • Difficulty: Easy.
  • Estimated time: about 20 to 40 minutes.
  • Required tools: Metric sockets and a tensioner tool or basic hand tools.

Oiwa Garage Tech Note

"Set tension to spec - a belt over-tightened kills the alternator and water pump bearings, too loose and it squeals and slips."

Frequently Asked Questions

How do I know if I have the EF-ZS (EFZS) engine?

Check the VIN / data plate in the engine bay - the line marked ENGINE shows your code (the example plate above reads EF-NS; yours must read EF-ZS (EFZS)). This part fits the EF-ZS (EFZS) engine only, so confirm the code before ordering.

How tight should the belt be?

To factory deflection - too tight wears the pump and alternator bearings, too loose squeals and slips. Recheck after a short drive.

How tight should it be?

To the factory deflection - check it again after a short drive once the belt has seated.

Fitment verified by the Kei truck specialists at Oiwa Garage · Listing updated June 2026.

You may also like
Pick up where you left off
Policies
RefundsShippingPrivacyTerms of Service