New OEM accelerator throttle cable 37010TA024 for Subaru Sambar Van KV3, KV4 models 1990-1998, shown full length with pedal and throttle end fittings.
Subaru parts diagram showing accelerator cable 37010TA024 routing and hardware for Subaru Sambar Van KV3, KV4 models 1990-1998.
Close-up of the end fitting on the Subaru Sambar Van KV3, KV4 accelerator cable 37010TA024, showing the barrel end that seats into the throttle linkage.
Threaded adjuster and lock nuts on the Subaru Sambar Van KV3, KV4 accelerator cable 37010TA024, used to set correct accelerator pedal free play.
Roll over image to zoom in Click on image to zoom
New OEM accelerator throttle cable 37010TA024 for Subaru Sambar Van KV3, KV4 models 1990-1998, shown full length with pedal and throttle end fittings.Subaru parts diagram showing accelerator cable 37010TA024 routing and hardware for Subaru Sambar Van KV3, KV4 models 1990-1998.Close-up of the end fitting on the Subaru Sambar Van KV3, KV4 accelerator cable 37010TA024, showing the barrel end that seats into the throttle linkage.Threaded adjuster and lock nuts on the Subaru Sambar Van KV3, KV4 accelerator cable 37010TA024, used to set correct accelerator pedal free play.

Accelerator Cable - Subaru Sambar Van KV3, KV4 Models - 1990-1998

Oiwa Garage
No reviews
Price:
$133.19
Stock:
In stock

Need help? Call or Text: 562-661-8862

Description

This accelerator cable fits the Subaru Sambar Van KV3, KV4 (1990-1998). It connects the accelerator pedal to the throttle linkage so the engine responds the moment you press. Direct-fit replacement for the original factory cable.

In Stock - ships from our California (USA) warehouse

Fast, reliable delivery - no overseas backorder wait.

Vehicle Fitment & Compatibility

Confirm your chassis code against the table below before ordering.

Subaru Sambar Van KV3, KV4 (1990-1998) - fitment
Make Subaru
Model Sambar Van
Chassis Codes KV3, KV4
Years 1990-1998
Part Type accelerator cable

100% Fitment Guarantee

Not sure about fit? Add your chassis/VIN number at checkout and we confirm it before we ship. If a part does not fit your Sambar, we exchange it or refund you in full.

Signs you need a new accelerator cable

  • Throttle sticks or is slow to return to idle
  • High or hanging idle after you lift off the pedal
  • A heavy, notchy, or gritty pedal feel
  • Frayed, kinked, or corroded cable ends
  • No throttle response at all - a snapped cable

Features & Function

  • Correct length and end fittings for the Sambar throttle linkage
  • Threaded adjuster to set pedal free play
  • Restores a smooth, direct pedal feel

Installation Specifications

  • Difficulty: Moderate.
  • Estimated time: about 30 to 60 minutes.
  • Required tools: Basic hand tools - open-end wrenches and pliers.

Oiwa Garage Tech Note

"Route the new cable exactly like the old one - no tight bends or kinks. Set the free play at the threaded adjuster, then work the throttle by hand and make sure it snaps shut on its own before you drive."

Frequently Asked Questions

How do I know the cable is the problem?

Have a helper press the pedal while you watch the throttle linkage. If the pedal moves but the linkage barely follows, or the throttle does not snap back when released, the cable is stretched, binding, or frayed.

Does this fit the Sambar Truck?

Yes - the Subaru Sambar Truck KS3, KS4 (1990-1998) uses the same accelerator cable. We list the truck version separately so you can confirm fitment against your chassis code.

Fitment verified by the Kei Truck specialists at Oiwa Garage · Listing updated July 2026.

You may also like
Pick up where you left off
Policies
RefundsShippingPrivacyTerms of Service