Miyaco M-Touch Front Outer Left or Right Split CV Boot Replacement Kit
Premium JDM Drivetrain Maintenance for Daihatsu Hijet Van S231V (2000-2004)
A torn CV boot is a ticking time bomb for your Daihatsu Hijet Van. Once dirt enters the joint and the internal grease slings out, you are looking at a costly, hard-to-source front axle replacement. The Miyaco M-Touch Front Outer Left or Right Split CV Boot Kit offers a permanent, factory-spec repair without forcing you to spend hours tearing down your Kei van’s suspension.
Engineered by Miyaco Automobile Industry Co. specifically for Japanese domestic market (JDM) vehicle clearances, this innovative split-boot design wraps seamlessly around your existing axle. Achieve a permanent OEM-quality seal while keeping your tools in the chest and your hands clean.
The Miyaco M-Touch Engineering Advantage
Many aftermarket split boots fail because they rely solely on a flat, glued seam. The Miyaco M-Touch system changes the industry standard with a mechanical solution so reliable it currently covers a majority of front-wheel-drive vehicles in Japan.
-
Patented Interlocking Fastener: Unlike universal boots that rely on messy adhesives alone, the M-Touch features a patented interlocking zipper-style groove. Once snapped together it forms a structural bond that will not pull apart under extreme steering angles or heavy suspension articulation.
-
Dramatically Less Repair Time: Skip removing the brake calipers, popping the ball joints, or draining transmission fluid. Traditional CV boot replacement can take 60 to 80 minutes per side; the M-Touch system allows a complete, secure installation in roughly 15 to 30 minutes.
-
Ring-Reinforced Valleys: The valleys of the M-Touch boot are reinforced with a specialized ring design that keeps the ridges from grinding against each other during sharp turns, extending the life of the rubber.
-
Strict Inspection Compliance: Engineered to meet rigorous Japanese Shaken (vehicle safety inspection) standards, ensuring a watertight seal that keeps vital CV joint grease locked safely inside.
Complete Vehicle Fitment & Compatibility
This kit is precision-molded specifically for the following Japanese mini van specifications:
| Make |
Daihatsu |
| Model / Type |
Hijet Van (Kei Van) |
| Chassis Codes |
S231V |
| Year Range |
2000-2004 |
| Axle Position |
Front Outer (Left or Right) |
Fitment Note: Please verify your vehicle’s chassis code on the aluminum ID plate prior to completing your purchase to ensure factory-spec fitment.
Video Installation Guides
See exactly how the patented interlocking system snaps together before you buy:
Standard Installation Guide
The M-Touch system is designed for straightforward DIY or professional garage installation without hydraulic presses or suspension teardowns.
-
Prep the Joint: Safely lift the vehicle. Cut away the old, torn CV boot and thoroughly clean the existing grease and road debris from the CV joint assembly.
-
Position the M-Touch Boot: Wrap the split boot over the axle shaft and apply the provided assembly lubricant to the patented fastener groove.
-
Lock the Fastener: Starting from the small-diameter end, press the interlocking grooves together until they audibly snap and seal into place.
-
Pack the Grease: Inject a high-performance CV joint grease (sold separately) directly into the joint assembly until the joint is fully packed.
-
Secure the Bands: Slide the boot over the joint and secure the stainless steel bands, ensuring the folded end of each band faces opposite the wheel's forward rotation to prevent snagging on road debris.
What’s Included in This All-In-One Repair Kit?
Oiwa Garage supplies this Miyaco kit with the boot, clamps, and assembly sealant needed for the repair (CV joint grease sold separately):
-
1x Miyaco M-Touch Precision-Molded Split CV Boot
-
2x High-Tension Stainless Steel Boot Clamps
-
1x Assembly Lubricant / Fastener Sealant
-
1x Illustrated Installation Manual
Note: A high-performance CV joint grease is required to complete this installation and is sold separately — it is not included in this kit.
Curated by Oiwa Garage
Sourcing reliable parts for imported JDM vehicles shouldn’t feel like a gamble. We specialize in keeping classic Japanese vehicles running exactly as their engineers intended. By upgrading to the authentic Miyaco M-Touch system, you are protecting your Kei van with parts that fit perfectly the first time.
