Stay ahead with the latest updates, exclusive offers, and expert tips on Japanese mini truck parts and accessories from Oiwa Garage. Sign up now and be the first to know!
248+ Five-Star Reviews | US-Based Kei Truck Parts Specialists
This Timing Belt fits the Daihatsu Hijet Truck S100, S110, S120, S130 (1994-1998) with the EF-NS (EFNS) or EF-ES (EFES) or EF-TS (EFTS) engine. It drives the camshaft in time with the crankshaft for correct valve timing.
In Stock - ships from our California (USA) warehouse
Fast, reliable delivery - no overseas backorder wait.
Confirm your engine before you order
This part is engine-specific and fits the EF-NS (EFNS) or EF-ES (EFES) or EF-TS (EFTS) engine only. Before ordering, find your VIN / data plate in the engine bay and confirm the line marked ENGINE reads EF-NS (EFNS) or EF-ES (EFES) or EF-TS (EFTS). The photo below shows where to look.
Example plate shown is an EF-NS engine (chassis S100P, 659cc). Yours shows your own code on the same ENGINE line - for this part it must read EF-NS (EFNS) or EF-ES (EFES) or EF-TS (EFTS).
Vehicle Fitment & Compatibility
The Hijet ran several engines in this era. Confirm your engine code on the VIN plate above, not just the chassis, against the table below.
Daihatsu Hijet Truck S100, S110, S120, S130 (1994-1998, EF-NS (EFNS) or EF-ES (EFES) or EF-TS (EFTS)) - fitment
Make
Daihatsu
Model
Hijet Truck
Chassis Codes
S100, S110, S120, S130
Years
1994-1998
Engine
EF-NS (EFNS) or EF-ES (EFES) or EF-TS (EFTS)
Part Type
timing belt
100% Fitment Guarantee
Not sure about fit? Add your chassis/VIN number at checkout and we confirm it before we ship. If a part does not fit your Hijet, we exchange it or refund you in full.
Signs you need this timing belt
An overdue or unknown-age belt
Cracks, glazing, or missing teeth
Preventive service
A whining or chirping front cover
Features & Function
Correct tooth count and width for the Hijet engine
Tough, heat-resistant construction
Direct-fit for the factory drive
Installation Specifications
Difficulty: Advanced.
Estimated time: about 3 to 4 hours.
Required tools: Cam/crank locking tools, breaker bar, torque wrench, and a jack to support the engine.
Oiwa Garage Tech Note
"Replace the tensioner and water pump while you are in there. Set TDC, then verify the timing marks before cranking."
Frequently Asked Questions
How do I know if I have the EF-NS (EFNS) or EF-ES (EFES) or EF-TS (EFTS) engine?
Check the VIN / data plate in the engine bay - the line marked ENGINE shows your code (the example plate above reads EF-NS; yours must read EF-NS (EFNS) or EF-ES (EFES) or EF-TS (EFTS)). This part fits the EF-NS (EFNS) or EF-ES (EFES) or EF-TS (EFTS) engine only, so confirm the code before ordering.
How many teeth is the belt and will it fit my engine?
It is cut for the listed EF engine - confirm your engine code on the VIN plate. Fitting a belt for the wrong engine will not time correctly.
Should I do the tensioner and pump too?
Yes - the labor to reach them is already done, so renew the tensioner and water pump with the belt.
Fitment verified by the Kei truck specialists at Oiwa Garage · Listing updated June 2026.
If you own an Acty - you owe it to your vehicle to buy one of the GhostFlow air filters! Easy to install & tremendous performance increase along with a surprising boost in MPG (KPL:)...all I did was install this & switched to running premium fuel grade and Funsiz3 is tracking 9 mpg increase! Uphill performance also took a significant boost! Just do it!!!
I'm very happy with the exhaust. It sounds great. I was juggling between this one and Special K's behind the bumper exhaust and I ultimately decided on this one. Installation was easy and the only thing I would recommend is getting some washers because the holes on the flange for the growler are ovaled out to allow for adjusting the fitment. Without the washers the flange nuts were just a bit to small.
I buy almost all of my Honda Acty product through OIWA's website and have never had a complaint. I would highly recommend OIWA's website for any kei truck products.
