Stay ahead with the latest updates, exclusive offers, and expert tips on Japanese mini truck parts and accessories from Oiwa Garage. Sign up now and be the first to know!
4.9 from 479+ Product Reviews | US-Based Kei Truck Parts Specialists
This Spark Plug Wires fits the Daihatsu Hijet Truck S100P, S110P, S100C, S110C, S100CT, S110CT (1/1994-6/1997) with the EF-NS (EFNS) engine. It carries the spark from the distributor to each plug without leak or misfire.
In Stock - ships from our California (USA) warehouse
Fast, reliable delivery - no overseas backorder wait.
Confirm your engine before you order
This part is engine-specific and fits the EF-NS (EFNS) engine only. Before ordering, find your VIN / data plate in the engine bay and confirm the line marked ENGINE reads EF-NS (EFNS). The photo below shows where to look.
Example plate shown is an EF-NS engine (chassis S100P, 659cc). Yours shows your own code on the same ENGINE line - for this part it must read EF-NS (EFNS).
Vehicle Fitment & Compatibility
The Hijet ran several engines in this era. Confirm your engine code on the VIN plate above, not just the chassis, against the table below.
Not sure about fit? Add your chassis/VIN number at checkout and we confirm it before we ship. If a part does not fit your Hijet, we exchange it or refund you in full.
Signs you need this spark plug wires
A miss that worsens in damp weather
Visible cracks, arcing, or burnt boots
Rough idle or stumble under load
Leads of unknown age on an import
Features & Function
Low-resistance core for a strong spark at each plug
Heat- and oil-resistant jackets with tight boots
Correct lengths for a clean routing
Installation Specifications
Difficulty: Easy.
Estimated time: about 20 to 30 minutes.
Required tools: Basic hand tools - the leads unclip by hand.
Oiwa Garage Tech Note
"Swap leads one at a time so you never cross the firing order, and seat each boot until it clicks."
Frequently Asked Questions
How do I know if I have the EF-NS (EFNS) engine?
Check the VIN / data plate in the engine bay - the line marked ENGINE shows your code (the example plate above reads EF-NS; yours must read EF-NS (EFNS)). This part fits the EF-NS (EFNS) engine only, so confirm the code before ordering.
Will these fit my distributor and coil pack?
They are cut and terminated for the listed Hijet engine - confirm your engine code so the lengths and ends match.
Can I reuse my old boots or clips?
Fit the set complete - mixing tired boots with new leads reintroduces the misfire you are trying to cure.
Fitment verified by the Kei truck specialists at Oiwa Garage · Listing updated June 2026.
It's pretty straight forward. The hardest part is getting the airbag wiring off the airbag. Mine was pinned on? I had to cut the plug off my airbag and then break it apart so I could use the horn plug(could probably cut that off-(since i cut it off the airbag anyway, I didn't do that). The ceramic nuggets plug into the airbag relay to shut the light off. Tape that in and plug it back in. All that fits underneath the adapter. It's fiddly but easy. The horn plugs into one of those weird rings.
Driving two vehicles. 1989 Landcruiser and 1995 Honda ACTy. Keep an eye for any parts I might need in the future. My Landcruiser parts spreadsheet is three pages long. With Oiwa Garage’s vast parts inventory I hope to be able to do the same for my ACTy.
